DRIFT CAR BRUSHEW 4WD 1/16 RTR
EUR 99.90
Sporty looks, sophisticated technology paired with a highly efficient gyro system and sufficient power for elegant drifts are combined in the LR16 Rally Car. Whether on the road, on the track or on the living room floor – this 1:16 scale model masters every terrain. The sensitive 2.4 GHz remote control gives a direct driving feel. The fast and powerful steering servo also ensures precise handling and the powerful 4WD drive in conjunction with the large battery (7.4V Li-Ion 1200mAh) allows driving times of 12-16 minutes at a top speed of up to 35km/h. The integrated gyro supports in every situation and keeps the LR16 Rally Drifter cleanly on track.
As a small addition, this model has been equipped with different lighting options, which can be adjusted via the transmitter. You can choose between three different types of LED lighting, so the front section gets a different impressive look each time. The model has already been equipped at the factory with good ball bearings, metal CVD drive shafts and a precise chassis.
Available in the RTR (Ready-to-Run) version, everything needed to operate the model is already included in the scope of delivery, except for household batteries for the remote control. An added bonus are drift tyres with black rims. These can easily be exchanged for the mounted rubber tyres to show off as a pure drift car.
Highlights:
Integrated gyro system: Additional stabilisation for precise handling adjustable via the transmitter.
Less friction and direct power transmission: Vehicle has ball bearings and metal CVD drive shafts
4WD drive for better traction: power from the powerful 390 engine is distributed to all wheels
Other features:
4WD drive
Ball bearings (less friction and more direct power transmission)
Fully proportional steering (sensitive control of throttle and steering)
Large battery for long driving times (Li-Ion 7.4V 1200mAh)
Different LED lighting modes at the front (switchable via the transmitter) and red LED light at the rear
USB charger
Splash-proof (fully suitable for outdoor use)
Technical data:
Length: 285mm
Width: 145mm
Height: 110mm
Weight: 600g incl. battery
Main material: plastic
Motor: 390 size brushed
Servo: 17g high-speed servo, 5-pin
ESC: Channel 40A all-in-one unit
Battery: Li-Ion 18650 7.4V 1200mAh, JST BEC connector, 68x36x19mm, 90g
Remote control: 4 channels, 2.4GHz, 11 available frequency channels
Top speed: 30-35km/h
Driving time: approx. 12-16min
Range: approx. 60-80m
Charger: USB with 1.5A charging current
Charging time: approx. 140-160min
Scope of delivery:
Model, fully assembled
Remote control
Battery
USB charger
Additional drift tyres
Miscellaneous tools
2x spare track rods
Instruction manual DE/EN
Required accessories:
4x batteries 1.5V Mignon AA for remote control